This side of the engine is nearly done. Time to finish the intake manifold. The 90deg swaging of the VVIS plate screw against the shaft. ...
Updated 17-09-2013 at 11:51 AM by Kaz-kzukNA1
Time to inspect the VVIS plates. This engine uses the OEM parts (side intake chamber, air box, air filter, TH body) for the intake air system so the amount of debris inside the intake manifold was minimum. Some of the black bits are the edge coating around the VVIS plate. Every ...
Updated 15-09-2013 at 02:53 PM by Kaz-kzukNA1
In the process of removing the intake manifold. Removed the TH body. This NSX is DBW model so fairly easy. You can see the VVIS plate at the far end and interesting to see some markings left inside the chamber possibly from the factory. ...
Updated 08-09-2013 at 09:43 PM by Kaz-kzukNA1
When I checked the VVIS plate for loose screws, I noticed that the TH butterfly was really dirty. So, asked the owner to let me clean it while the air box was off the car. ...