For many years, people changed the original front, rear or door emblem to something different to make some changes. For the door emblem, it seems that ‘NSX-R’ one is the first choice for a quick modification. Personally, I don’t like to show the text of ‘NSX-R’ when it is not actually the Type-R model so stayed with ‘NSX’ logo but went for the one for the Type-S. ...
As the road surface was damp but no water paddle, it was good for the ABS test with stuck closed solenoids. Set the A/C at 32degC to make sure to push out any bubbles left inside the heater core after the TB/WP service and went out for the test driving session. Before going out on the main road, activated the ABS many times while the tyre was still cold. Sometimes, I got the kick back but as three ...
There are several aftermarket A/C filter available from some of the NSX specialists. I normally just create DIY air filter using the cooker hood filter. It won’t prevent the pollen, fume or dust from entering the cabin but good enough to stop the leaves and large items passed through the meshed air scoop. Before starting this process, it is always a good idea to keep some spare clips ...
Time to wash the A/C evaporator. When I first looked at the evaporator on this NSX, it looked not too bad for the age and the mileage of the car. Any way, nothing new or special so wore the protective gear and gave the shot of air gun as usual. Bad idea…. There were 100’s of small pieces of leaves left at the bottom of the evaporator container. ...
Took out the Front camber adjuster bolts to apply silicone grease before visiting the alignment platform. Unfortunately, both R & L Caster adjuster were seized so we’ll see how it goes during the alignment session. During the ...
Recent Comments
