New CRK/CYL sensor installed and carefully torqued the fixing bolts. All four cam shafts ...
While in UK and US, it’s cheaper to buy the WP, TB lower cover and the tiny grommet as a set using the -305 WP assy parts no., it’s not the case in Japan. It’s cheaper to buy them separately as three different parts. WP will be installed shortly but before that, prepared the TB lower cover with the expensive new gasket. ...
Updated 24-10-2013 at 12:22 PM by Kaz-kzukNA1
New gaskets behind the TB back cover plates. Important for TB protection. Before the arrival of the parts from Japan, wanted to finish as much as possible so although it’s going to be duplicated tasks, decided to install the old WP and TB in order to carry out the time consuming marathon 4Hr valve clearance ...
Updated 11-09-2013 at 10:03 AM by Kaz-kzukNA1
Small contamination trapped at the VTEC spool valve filter. It’s the later spec one so the solenoid has smaller diameter (about 25mm) compared ...