Not much to report while in the middle of 4Hr marathon valve clearance adjustment session. ...
TB tensioned properly and adjuster bolt torqued to the spec. New TB lower cover ...
As always, IAT sensor was covered in sticky blowby gunk. Cleaned it and will be installed with new o-ring. ...
Updated 18-04-2014 at 01:23 PM by Kaz-kzukNA1
New gasket for the VVIS chamber and butterfly mechanism. Must replace all ten washers. ...
Some sort of debris baked into the surface of the IG coil cover. Had to carefully polish it out. New rubber seal installed and silicone grease will be applied later. ...