Time to service the intake manifold for the VVIS butterfly screw inspection. For this mileage, very small amount of blowby oil mist were left inside the bottom chamber. Some of them were already sucked back into the engine based on the oil film around the intake port. ...
Some sort of debris baked into the surface of the IG coil cover. Had to carefully polish it out. New rubber seal installed and silicone grease will be applied later. ...
Just a quick video to help other owners experiencing CL disc slip due to lack of free play at the CL master cyl pushrod. Without the free play, the CL will slip once the CL Hyd system has warmed up. Depending on the pushrod adjustment, you may not notice the issue when the CL Hyd system is still cold. Please enable the caption (CC) by hovering your mouse at the bottom of the video screen and clicking on the ...
Updated 16-01-2014 at 01:22 PM by Kaz-kzukNA1
The VTEC spool valve installed with 2 new gaskets and 6 new bolts at each bank. Later spec smaller diameter solenoid model so P08 version used. ...
Updated 15-01-2014 at 12:16 PM by Kaz-kzukNA1
Extra parts arrived from Japan. There are many parts involved when replacing the Oil cooler and unfortunately, three of them are out of stock at the moment. One of them is the very Oil cooler body and it won’t be available until mid/Feb which means it won’t arrive in UK until late/Feb. Discussed the matter with the owner and we’ll replace it in the future. ...