Tried to show the amount of blowby mist trapped inside the intake manifold VVIS chamber but not easy to do so using my camera. Probably not enough to cause white smoke at very high rpm but at some point, open the VVIS and remove all blowby oil. Best when doing the INJ cleaning and balancing. The screw head of VVIS plates were checked with fibre scope and as far as I can see, ...
Before/after of cleaning the intake manifold entry. It was that dirty.... ...
Doing bit of catch up updating the blog. As expected, as seen on many NSX, the area around the RR wheel speed sensor head was oxidised and completely stuck inside the hub. Had to carefully trim it out from the fitting hole ...
Before/after shots of the intake ...
Intake manifold back in place together with Eng Loom. Some of the bolts were the wrong spec so looks like someone worked on the engine in a hurry. ...