Briefly assembled the bracket and PV for checking the pipe alignment. After some juggling, all new brake pipes together with the new pipe holders installed. ...
Holders and clips installed, pipes in position but fittings are not torqued yet until all connections are made to fix the final position of each pipes to prevent them from twisting. ABS modulator bracket installed and torqued. Modulator briefly installed for positioning of pipes. More to follow…
Updated 25-04-2011 at 10:30 PM by Kaz-kzukNA1
After removing most of the brake pipes under the bonnet, it’s time for the spaghetti juggling again. You will need to install 8 new brake pipes. You may need extra time if you have never done this before. Once the old pipes are removed, it’s good time to clean the area as you won’t get so many opportunities to clean these areas. ...
Updated 25-04-2011 at 10:27 PM by Kaz-kzukNA1