Pressure bleed the brake system. As I didn't have to overhaul the master cyl this time, there was no need to empty it so fairly straight forward process. Addition to the later spec brake caliper and bracket, I already ...
Pressure bled the brake. Silicone grease on the IG coil cover gasket. ...
Everything back in place, pressure bled the brake system, staked the spindle nut and kept the car on the ...
As reported earlier, someone just opened the idle adjust screw without cleaning the TH body in the past. Now the TH body is so much cleaner that the extra air was passing through the idle air port. Initially, the adjust screw on this engine was sitting almost close to the edge, like 0.5 – 1mm away. There was also ...
New GND cable installed. As mentioned many times, please do not over tighten the terminal cramp. You should see several mm gap when the cramp is secured to the battery post. People tends to just tighten it until ...