For the first time in 6 years, I dropped my digital camera and although I can still take the photo, none of the menu buttons, zoom, etc features work….. Some of the photos here were taken using the mobile phone but not ideal for my purpose. Need to think what to do until the replacement ...
Both drive shafts, suspension arms and anti-roll bar are now back in place. Applied silicone grease around the body of all suspension bolts that were removed during the process. This will prevent ...
As a standard procedure on replacing the MTF, always check the MTF strainer. It seemed that the strainer cover was never removed in the past. Spent extra hour with it and finally, it started to rotate slightly and it came off. There were small particles inside the meshed filter so several miss-shifts were carried out in the ...
Updated 18-04-2012 at 02:32 PM by Kaz-kzukNA1
Drained the MTF. As always, any trans fluid smells bad..... Finally, the MTF strainer cover came off. It was heavily corroded and didn’t want to come off. There were tiny particles and metal ...
Filled up the MTF until it just started to drip out from the filler hole. MTF side is done. After draining ...