The LMA at the rear bank replaced, rocker shafts and arms back in place after cleaning. As reported earlier, had to replace both sealing bolts for this bank. ...
Considering the very little temperature difference between day and night, gradual temperature increase/drop of the garage oil heater and low humidity, probably I could have just used the fresh Mobil 1 instead of using the ...
Forgot to post the photo of cam shaft. As reported earlier, no abnormal scratch and just the coating wear. Considering the mileage, quite normal and being driven regularly with long distance journey helped a lot in keeping good condition inside the engine. ...
Double checked that the brown cam seals are pushed into the correct position. Several years ago when I injured my back, even after visually checking the position of this seal, I made mistake resulting in oil seepage so since then, taking photos for better inspection method. ...
Kept the oil heater on inside the garage due to cold and wet weather forecasted as well as in order to stabilize the digital torque wrench. Cleaned the back side of the TB cover plate and replaced all six seals. ...