View RSS Feed

ABS Upgrade

  1. KSP ABS Upgrade Loom, Cruise Control switch 01

    by , 15-11-2014 at 12:21 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)

    Once again, another owner wanted to upgrade his classic ABS to the latest one body solution introduced from 99/00 models (definition of year model depends on the country spec) so placed the order for the KSP Engineering ABS upgrade loom.


    Normally, ...

    Updated 20-11-2014 at 11:17 PM by Kaz-kzukNA1 (added title number)

    Categories
    ABS Upgrade , Electronics
  2. FR wheel speed sensor

    by , 21-09-2014 at 09:37 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)
    Had very busy weekend as one owner collected his NSX from my place in the morning and the other owner brought his in the afternoon and then the interview process for the Health Check.
    Found some spare time so finally managed to replace the suspected faulty wheel speed sensor.


    Several months ago, I started to hear the faint clicking sound from around the pedal floor area while driving at low speed without using the brake.
    From my past experience with the ...

    Updated 23-09-2014 at 11:51 AM by Kaz-kzukNA1 (typo)

    Categories
    ABS Upgrade , Electronics , My NSX
  3. KSP ABS Upgrade Loom

    by , 31-07-2014 at 01:29 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)
    While working on the NSX, I was modifying the KSP ABS upgrade loom for LHD model.

    For RHD model, I only need to add the SCS terminal with 1pin or 2pin TE-AMP connector but while I was checking the cable length, worried about the GND cable on LHD model.




    On LHD model, the modulator will be facing 180deg opposite direction compared to the RHD
    ...
  4. ABS Check

    by , 28-07-2014 at 10:39 AM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)






    As reported earlier, I received many parts from Japan when I placed the order before the parts price went up from 01/Jul onwards.


    One of the parts was the latest ABS modulator and finally I managed to find some time testing it in preparation for the installation in the future.

    As I already upgraded my ABS to the latest ...
  5. ABS error code #12

    by , 18-02-2014 at 01:47 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)





    Still recovering from the cold but I had to collect some parts yesterday so
    drove my NSX to the local Honda garage.

    On the way, it triggered ABS warning light.

    After spending 20 years with about 145K miles together,
    looks like my NSX reflects the health condition of the owner as well.

    I have already upgraded my ABS to the one body latest spec so
    the brain power is much sophisticated than the classic one.
    ...
    Categories
    ABS Upgrade , My NSX
Page 9 of 14 FirstFirst ... 7891011 ... LastLast