Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer

The automatic clearance adjuster for the parking brake was also removed and overhauled with the new seal/o-ring. Then, re-installed and checked for the smooth operation.

Some of the before/after shots.


New Goodridge brake ...

Tags: brake line, calliper overhaul

Categories

Brake

Although all of the thread on the brake calliper and bracket seemed to be cleaned and checked by Bigg Red, I had to carry out extra cleaning process for the bot thread on the bracket and banjo bolt area.

They were fine for the first few turns but then it suddenly get heavy and required extra torque so I was not comfortable going any further.


Looked to be some paints were left in there.

The thread for the bleeder screw was ...

Tags: calliper overhaul

Categories

Brake

I must admit, I have on purposely selected probably one of the most rusty and corroded calliper/bracket set to test this service and I am really happy with the result.


If you are planning to work on your callipers, I would highly recommend using this service.

...

Updated 27-09-2011 at 09:46 AM by Kaz-kzukNA1

Tags: bigg red, polymer coating

Categories

Brake

I would like to introduce you the new service offered by the brake remanufacturing company – Bigg Red Ltd.

It is the Polymer Coating service for the NSX brake calliper and bracket.


I would like to say big thank you to Tony and John at Bigg Red for supporting us to establish this new deal and lots of time being spent for the conversation between us.

I also would ...

Tags: bigg red, polymer coating

Categories

Brake

After carefully stripping the coating off from both side of the circuit board, the higher current spec relays are now installed.




You can find other examples in the 'EPS, Power Steering' tag under the 'Electronics' section of my thread 'NSX Technical and Service Information Index' and you can find the link at the right side of this screen ...

Tags: eps, power steering

Categories

EPS - Power Steering