Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer

...

Tags: coolant hose, crank pulley, fuel filter, oil cooler, oil filter

Categories

Engine/Tyre , Cooling

...

Tags: crank pulley, oil cooler

Categories

Health Check Service

Someone was desperate to apply ceramic like grease in this area.
What a mess…..

This grease was also used on the crank shaft….. Spent some time cleaning the crank pulley bolt and crank thread ...

Updated 14-07-2015 at 05:45 PM by Kaz-kzukNA1

Tags: a/c idle pulley, crank pulley, oil cooler

Categories

Engine/Tyre , Cooling

Just keep buidling the engine in preparation for the installation.




New two coolant hoses at the oil cooler.

The rust around the hose was fairly thick but the other side was fine so for now, ...

Tags: acg, crank pulley, iat sensor, oil cooler, vtec spool valve

Categories

TB/WP/Valve Service

Vacuum leak check of the cooling system.

When this NSX arrived at my place, the coolant level was already at the MIN so it was leaking from somewhere and as mentioned yesterday, it was very likely to be around the hose fitting of the heater core bleeder plug.
So, left the system under vacuum for 45min to see any further leakage.



...

Tags: crank pulley, fuel filter, vacuum fill, vacuum leak check

Categories

Engine/Tyre , Cooling , Fuel and Emissions