Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer

Started to work on another NSX from last week.
The service menu is to carry out the Health Check, replace FL wheel speed sensor, replace all cabin carpets to 02+ NSX-R spec and replace grey interior panels to the later spec black ones.



...

Updated 27-04-2016 at 01:26 PM by Kaz-kzukNA1

Tags: brake pad, hub bearing, wheel speed sensor

Categories

Health Check Service , Brake , Electronics

New RR wheel speed sensor and installed. Applied silicone compound around the sensor body and hub carrier hole in order to prevent future oxidation.



...

Updated 20-12-2014 at 01:34 PM by Kaz-kzukNA1 (defined blog category)

Tags: eng bay cleaning, wheel speed sensor

Categories

TB/WP/Valve Service

Cut off the ...

Tags: cat bolt, eng bay cleaning, exh bolt, o2 sensor, wheel speed sensor

Categories

TB/WP/Valve Service

Doing bit of catch up updating the blog.




As expected, as seen on many NSX, the area around the RR wheel speed sensor head was oxidised and completely stuck inside the hub.
Had to carefully trim it out from the fitting hole ...

Tags: blowby, blowby gas, coolant pipe, eng cleaning, intake manifold, th body, vvis, wheel speed sensor

Categories

TB/WP/Valve Service , Cooling , Fuel and Emissions , Electronics

O2 sensor cables were not secured at all....

Somewhat the oil pan looked too flat. Probably someone used the ...

Tags: drive shaft, ig coil cover, ig coil harness holder, o2 sensor, oil pan, wheel speed sensor

Categories

Health Check Service