Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer

Now I understood why there were so much oil around the engine head as well as some of the spark plug body.


Almost all of the fixing nuts for the valve covers were not tight enough especially the ones under the IGN Coil covers.


They were just finger tight.


Probably, the valve cover gaskets, seals and the round disc seals under the nuts were not replaced during the last TB service and thus, couldn’t get proper ...

Tags: tb cover, valve cover

Categories

TB/WP/Valve Service , Engine/Tyre

Three hoses under the centre floor section are done.


Moving onto the engine bay.

As seen on other NSX, part of the rubber seal at the Thermostat was already deteriorated and gone missing.


Replaced it with the new spec.

...

Tags: coolant hose, thermostat

Categories

Engine/Tyre , Cooling

While dealing with the TB/WP/Valve service, it is easier to work on the cooling system in parallel so started replacing the coolant hoses.


This NSX is RHD, NA2, DBW, MT model so 21 hoses in total.


During the winter when I work on the cooling system, I normally place the hoses on the oil heater to keep them warm to assist the installation.

...

Tags: coolant hose

Categories

Engine/Tyre , Cooling

Just keep removing the parts….


Noticed that during the last TB service, some of the bolts for the TB mid covers were not placed back and missing.


Not the first time to see this and quite common human error, I’m afraid.

Due to the valve cover gasket not replaced or not installed properly during the last TB service, there were lots of oil seepage behind the crank pulley. ...

Tags: oil cooler

Categories

TB/WP/Valve Service , Engine/Tyre

御結婚、おめでとうございます。いつまでも、お幸せに。


It was so good to see happy couple cerebrating in their own style with friendliness and dignity.


Made lots of people happy across the world.



Hope these corgis also had good time… Always makes me happy when watching this even when I’m tired…
(Courtesy of Freeview)




Kaz

Updated 01-05-2011 at 09:48 AM by Kaz-kzukNA1

Tags: corgi, royal wedding

Categories

Personal View/Self Talk