Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer

New CRK/CYL sensor installed and carefully torqued the fixing bolts.






All four cam shafts ...

Tags: cam disc, cam holder, cam seal, cam shaft, crk/cyl sensor, cyl/crk sensor, tb cover, tb cover plate, tb mid cover

Categories

Eng Refresh Stage 1 + LMA

While in UK and US, it’s cheaper to buy the WP, TB lower cover and
the tiny grommet as a set using the -305 WP assy parts no.,
it’s not the case in Japan. It’s cheaper to buy them separately as
three different parts.


WP will be installed shortly but before that, prepared the TB lower cover with
the expensive new gasket. ...

Updated 24-10-2013 at 12:22 PM by Kaz-kzukNA1

Tags: cam gear, crank oil seal, crank seal, ig coil cover, tb back plate, tb cover plate, tb lower cover, tb mid cover, water pump

Categories

Eng Refresh Stage 1 + LMA

Small contamination trapped at the VTEC spool valve filter.









It’s the later spec one so the solenoid has
smaller diameter (about 25mm) compared ...

Tags: cam holder, cover plate, spool valve, tb back cover, tb cover plate, tb front cover, tb mid cover, tb rear cover, vtec, vtec solenoid, vtec spool valve, vtec valve

Categories

Engine Refresh Stage 2