Electronics

After testing the super bright LED parking/side light for 2 years and 8 months, one of them failed so decided to replace it.


I thought about getting different model but considering the design/size, wattage, super brightness and the harsh vibration from Type-S suspension setup, I think it survived quite well so went with the same one.




At the same time, I wanted to test the LEDs for the cabin so ordered ...

Updated 12-04-2012 at 12:07 PM by Kaz-kzukNA1

Tags: led

Categories

Electronics

Modified the centre arm rest and the thin aluminium plate to accommodate the adapator loom. Nicely installed and tested with no issues. Done.

Updated 03-10-2012 at 11:02 AM by Kaz-kzukNA1

Tags: ipod, pa11-hon

Categories

Electronics , Audio

Time to re-install the audio head unit and start the installation of iPod Adaptor USA SPEC PA11-HON.

As the Audio head unit was out of the NSX, I could have installed the adaptor loom directly at the back of the head unit.




However, I prefer installing it using the CD changer loom/connector behind the left ...

Updated 06-02-2012 at 10:23 AM by Kaz-kzukNA1 (New image file link)

Tags: ipod, pa11-hon

Categories

Electronics , Audio

Depending on the state of your audio head unit, you may need to reinforce your ACC line at the CD changer port before installing the iPod adaptor.


In fact, to be on the safe side, I’ll probably make these two items (replacing CAPs and reinforcing the ACC line) as a ‘MUST’ service before installing the iPod adaptor at my place.



...

Other CAPs (capacitors) were also leaking the acid and damaged the circuit tracks.






...

Updated 06-02-2012 at 10:48 AM by Kaz-kzukNA1 (New link to image file)

Tags: audio head unit

Categories

Electronics , Audio