Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer

After disinfecting the Evapo, placed the blower motor fan back in place and
reconnected the battery.

Now, everything back in place apart from the spare wheel.

I’ll put it back once I’m done with the missing coolant hose at the water valve.



Although there were plenty of tread/rubber ...

Tags: evaporator

Categories

Heater, A/C

After blowing out as many debris as possible from the evapo area,
started washing it with great care not to damage the fragile fins.

Due to the effect of flash and my lack of camera ...

Tags: a/c air filter, diy a/c filter, evaporator

Categories

Heater, A/C

Filled the Honda MTF-3 to the filler neck and left it for a while to
let the excess to drain out.

Unless you are taking your NSX to the track regularly or have aftermarket LSD,
you must use the MTF with soft viscosity but super strong oil film due to the
oil passage design on our gbox.

MTF-3 is very ...

Tags: mtf

Categories

Driveshaft

Hi, all.

I have been receiving similar questions/enquiries regarding my services from
many owners or potential owners so I would like to share my reply to them here.


First of all, I don’t carry out so called ‘pre-purchase inspection’ for anyone.
This is to be fair with the seller as well as for the buyer.
I’m quite sure I’ll find several issues on any NSX and also
I won’t be able to spot all of the issues within the available ...

Tags: timing belt

Categories

Personal View/Self Talk

Seems like I forgot to take photo of left drive shaft before overhauling it but
this is the end result.

Beautifully refurbished left drive shaft.

...

Tags: drive shaft

Categories

Driveshaft