Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer

Not much to report while in the middle of 4Hr marathon valve clearance adjustment session. ...

Tags: tb front cover, tb lower cover, tb mid cover, tb rear cover, valve clearance, water pump

Categories

TB/WP/Valve Service

TB tensioned properly and adjuster bolt torqued to the spec.






New TB lower cover ...

Tags: coolant hose, egr, egr valve, tb lower cover, tb tension adjuster, tb tension adjuster bolt, timing belt

Categories

Eng Refresh Stage 1 + LMA

As always, IAT sensor was covered in sticky blowby gunk.
Cleaned it and will be installed with new o-ring.





...

Updated 18-04-2014 at 01:23 PM by Kaz-kzukNA1

Tags: iat sensor, spark plug, tb cover, tb lower cover, timing belt, valve cover gasket

Categories

Eng Refresh Stage 1 + LMA

New gasket for the VVIS chamber and butterfly mechanism.




Must replace all ten washers.



...

Tags: egr pipe, gasket, intake manifold, tb adjuster bolt seal, tb lower cover, th body, vvis, vvis gasket

Categories

Eng Refresh Stage 1 + LMA

Some sort of debris baked into the surface of the IG coil cover.
Had to carefully polish it out.




New rubber seal installed and silicone grease will be applied later.



...

Tags: ig coil cover, insulator, tb lower cover, th body

Categories

Eng Refresh Stage 1 + LMA