Body

The owner wanted to replace his key as the existing ones were showing the sign of fatigue.


The top section of the key was covered in rubber like material and it already deteriorated and causing problem when trying to remove the key from the cyl.


I think this rubber like material on the key is UK or EU (and possibly other countries) model specific as it is not used on JDM or US Acura models.


Checked ...

Tags: key, monel

Categories

Body , Parts

While waiting for the cooling system to cool down after the compression check, decided to work on the cabin side for a while.

New Main Relay installed.


You can find the procedure and detail from here.
http://www.nsxcb.co.uk/showthread.ph...6800#post66800


You can find the same link from my ‘NSX Technical and Service Information ...

Updated 10-06-2011 at 11:20 AM by Kaz-kzukNA1

Tags: button, main relay

Categories

Body , Electronics

As I don’t like working on the engine while the damper is too weak to hold the hatch glass opened, decided to start replacing the dampers first.

You could recharge the gas if you want to but getting the new one from Japan is also a good option.


It comes with the stud bolt as well.


Now I don’t need to hold the Eng Hatch glass with my special padded bloom ...

Tags: boot lid, damper

Categories

Body

It was nice meeting some of you today at Japfest.


As I had several higher priority projects, I was not sure whether I can attend the event or not until the very last moment so only managed to wash the car and treat the seat leather the day before the event.


It seems that Liquid Leather is one of the most preferred products to treat the leather but I have never used it.


There are several feedbacks on this ...

Updated 27-05-2011 at 01:37 PM by Kaz-kzukNA1

Tags: japfest, leather

Categories

Body , My NSX , Personal View/Self Talk

Replaced the fixing screw at the Front Turn Signal housings.


I think some of the members posted exactly the same issue in the Forum section in the past.


Not sure why this kind of material and design were used for this screw but sooner or later, it will corrode and make your life very difficult when trying to remove the housing.


You can still replace the light bulbs (turn signal and small/parking) from the top without ...

Updated 21-05-2018 at 01:26 PM by Kaz-kzukNA1

Tags: 33303-sl0, turn signal

Categories

Body , My NSX