Electronics

Nothing new here.
Non-DBW type so should have been a quick service.......








Someone broke the clips holding the upper rear interior trim and
instead of getting the new clips,
it was using ...

Updated 05-02-2013 at 02:15 PM by Kaz-kzukNA1

Tags: main relay

Categories

Electronics

As reported earlier in the following posts,
I have been testing the modification on Clock and CCU to
disable the dim feature when the light was switched on.

CCU Illumination

CCU Illumination 02


It will keep the text on the CCU/Clock display and the LED behind
the CCU push buttons at the max brightness even when the
light switch was operated.


Followings are the detail of the modification ...

Tags: ccu, illumi control, illumination, illumination control, vfd

Categories

A/C CCU Board Service , Electronics

I have been using the battery conditioner from Optimate/Accumate for
many years simply because it was used by many racing teams for
charging their battery on the race cars and etc.


I have been very happy with their products and never had any issues.


I know ...

Tags: battery conditioner, ctek, mxs 5.0

Categories

Electronics , Personal View/Self Talk

On going testing of modified setup on Clock and CCU illumination.








Under the daylight with the light switched on.

This photo was taken when only the clock was modified.











...

Tags: ccu, illumi control, illumination, illumination control

Categories

A/C CCU Board Service , Electronics

While working on MX5 engine, I was looking into the way on how to
disable the dim function on the illumination at CCU display (VFD).


Can’t remember how it used to be when my NSX was new but
as many owners experienced,
it is almost impossible to see anything on the display of Clock, CCU and
Audio Head Unit during the daylight when the small side light is
switched on.


As reported earlier in this ...

Tags: ccu, illumi control, illumination, illumination control

Categories

A/C CCU Board Service , Electronics