View RSS Feed

Body

  1. Interior noise 03

    by , 25-07-2011 at 11:39 PM (Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background)



    The cracked parts were glued but as they didn’t use the anti-vibration type, already most of the crack were back there.



    Click image for larger version. 

Name:	CCUcase01.JPG 
Views:	876 
Size:	116.8 KB 
ID:	10004
    Click image for larger version. 

Name:	CCUcase02.JPG 
Views:	865 
Size:	109.9 KB 
ID:	10005

    Looks like someone worked on the CCU in the past but put too much force when installing the unit back in palce.

    Bottom of the case at both sides were already cracked…




    Click image for larger version. 

Name:	GlueBolster01.JPG 
Views:	862 
Size:	141.2 KB 
ID:	10003
    ...
    Categories
    Body
  2. Interior noise 02

    by , 25-07-2011 at 11:38 PM (Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background)


    Click image for larger version. 

Name:	DoorHandle01.JPG 
Views:	829 
Size:	165.6 KB 
ID:	9998

    I need to be careful if I’m going to remove the door card because the door handle is already showing sign of crack….





    Click image for larger version. 

Name:	LeftApiller.JPG 
Views:	847 
Size:	141.7 KB 
ID:	9999

    Poor A pillar trim at the left side…

    The bottom corner was not installed properly and forced behind the dashboard resulting in surface material squashed.





    Click image for larger version. 

Name:	CentreAirVent01.JPG 
Views:	815 
Size:	139.3 KB 
ID:	10002

    Looks ...
    Categories
    Body
  3. Interior noise 01

    by , 25-07-2011 at 11:37 PM (Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background)





    One of the highest priority items to be fixed for this owner is the interior noise.


    There are several different security devices installed and the windshield was replaced in the past (probably by the previous owner).


    Unfortunately, all of these works were not carried out with care so there are lots of gaps around the interior panel, clips were broken, etc resulting in big noise while driving the car.
    ...
    Categories
    Body
  4. Fuel Lid Alignment

    by , 22-07-2011 at 11:35 PM (Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background)



    Click image for larger version. 

Name:	FuelLidAlignment.JPG 
Views:	910 
Size:	158.4 KB 
ID:	9992

    I noticed that the fuel lid stayed closed even when the opener lever was lifted.


    Already there were some signs of someone tried to adjust the alignment in the past.


    So, removed the lid and found that the actual hinge was bent in the past causing very heavy movement.


    Greased it and moved the position of the spring and at the moment, it works fine but when the temperature ...
    Tags: fuel lid Add / Edit Tags
    Categories
    Body
  5. Registration Plate

    by , 22-07-2011 at 11:30 PM (Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background)



    The owner ordered the replacement reg. plate through Honda and they were delivered to my place the other day.




    Click image for larger version. 

Name:	RegPlate01.jpg 
Views:	641 
Size:	112.4 KB 
ID:	9990

    We agreed that it is best for me to drill the holes on the new plates so masked it and used several different size drill bits to gradually enlarge the hole.




    Click image for larger version. 

Name:	RegPlate02.JPG 
Views:	722 
Size:	87.5 KB 
ID:	9989

    For the rear plate, due to the position of the fixing hole, the ...
    Categories
    Body
Page 37 of 39 FirstFirst ... 273536373839 LastLast