View RSS Feed

Electronics

  1. Preparation 01

    by , 11-02-2013 at 10:38 PM (Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background)




    Started to work on another NSX.

    The service menu is to replace the OEM coilover with
    the BC Racing one + Swift spring, Health Check,
    LED bulbs, interior noise, etc.


    As always, I wanted to first carry out the test driving session
    before touching anything but I didn’t fancy driving on this
    sorbet like road condition today.

    Also, when working on the coilover kit,
    you don’t want to work on the
    ...
  2. Led

    by , 11-02-2013 at 10:37 PM (Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background)




    I have been using
    several LED bulbs on my NSX and
    although they are really bright, some of them failed within
    1 or 2 years probably due to the contained heat inside the
    bulb holder and the also the soldering crack from my
    Type-S suspension.

    A few owners wanted to try the same festoon bulb as mine
    for the interior and the boot light but unfortunately,
    the vendor in Japan was too busy with another project that
    ...
    Tags: led Add / Edit Tags
    Categories
    Electronics
  3. Battery GND cable

    by , 04-02-2013 at 10:37 PM (Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background)







    While removing the battery,
    noticed that the battery holder design was not the NSX spec.

    The cutoff area was too small/short and too close to
    the positive terminal.


    It should look like the upper one.

    The owner brought the proper parts so will use it on installation.

    ...
  4. Main Relay

    by , 04-02-2013 at 10:36 PM (Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background)


    Nothing new here.
    Non-DBW type so should have been a quick service.......








    Someone broke the clips holding the upper rear interior trim and
    instead of getting the new clips,
    it was using
    ...

    Updated 05-02-2013 at 02:15 PM by Kaz-kzukNA1

    Tags: main relay Add / Edit Tags
    Categories
    Electronics
  5. CCU Illumination 03

    by , 03-12-2012 at 12:06 AM (Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background)



    As reported earlier in the following posts,
    I have been testing the modification on Clock and CCU to
    disable the dim feature when the light was switched on.

    CCU Illumination

    CCU Illumination 02


    It will keep the text on the CCU/Clock display and the LED behind
    the CCU push buttons at the max brightness even when the
    light switch was operated.


    Followings are the detail of the modification
    ...
Page 36 of 45 FirstFirst ... 263435363738 ... LastLast