View RSS Feed

Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background

Testing description section.

  1. ABS Upgrade, Door Window Refresh, etc 01

    by , 30-05-2015 at 11:51 AM (Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background)









    Started to work on another NSX from around Thursday this week.
    The service menu is to upgrade the 1st gen ABS to the latest spec, refresh the door window system, etc.


    As I’m not going to touch the eng, gbox, suspension, brake calliper, etc during this service, only carried out brief test driving session before start removing any parts.
    Some feedback to the owner.


    1. Suspension
    ...

    Updated 30-05-2015 at 12:06 PM by Kaz-kzukNA1 (extra info)

    Categories
    ABS Upgrade
  2. KSP ABS Upgrade Loom

    by , 29-01-2015 at 01:07 PM (Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background)






    As I started working on this loom recently, wanted to finish the modifications for the LHD application.





    Converted the SCS terminal into 2pin AMP connector so that the familiar 'paper clip' method ...
  3. KSP ABS Upgrade Loom, Cruise Control switch 02

    by , 20-11-2014 at 11:47 PM (Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background)






    As my right hand is still not fully recovered and on icing treatment, decided to do light duty tasks for the day.






    Modified the KSP ABS
    ...
  4. KSP ABS Upgrade Loom

    by , 31-07-2014 at 01:29 PM (Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background)
    While working on the NSX, I was modifying the KSP ABS upgrade loom for LHD model.

    For RHD model, I only need to add the SCS terminal with 1pin or 2pin TE-AMP connector but while I was checking the cable length, worried about the GND cable on LHD model.




    On LHD model, the modulator will be facing 180deg opposite direction compared to the RHD
    ...
  5. ABS Upgrade 08

    by , 31-01-2013 at 10:36 PM (Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background)





    Final stage of the ABS Upgrade.

    Just went through the ABS reset sequence using
    the ABS dedicated SCS terminal near the modulator.

    At the end of the process,
    confirmed the two flashes of ABS light so
    the system has been reset
    correctly.


    Done.



    Updated 02-02-2013 at 07:46 PM by Kaz-kzukNA1

    Categories
    ABS Upgrade
Page 3 of 4 FirstFirst 1234 LastLast