View RSS Feed

Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background

Testing description section.

  1. Eng Refresh, Health Check - Prep 02

    by , 13-02-2014 at 03:31 PM (Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background)








    The right side tail light alignment was not great against the bumper and
    the centre & left tail light assy.
    ...
  2. Cabin Temperature sensor, etc

    by , 29-11-2013 at 10:46 PM (Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background)



    The noisy cabin temperature sensor.
    It was full of dust as reported earlier.
    Disassembled, adjusted and now it’s clean.




    ...
  3. Health Check 05

    by , 15-11-2013 at 12:38 PM (Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background)



    Already in the process of removing the brake caliper and coolant hoses so
    doing bit of catch up updating the blog.





    For some reason, someone trimmed part of the door handle at both R & L sides.

    ...
  4. Health Check 02

    by , 10-11-2013 at 10:35 PM (Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background)





    Temporarily installed my re-soldered one for a test and confirmed the FCU failure.
    The faint noise you can hear in the background after replacing the FCU is the
    aspirator fan at the cabin temperature sensor.


    As seen on many NSX, it was full of dust making this noise.


    ...
  5. Alignment 02, Final Touch

    by , 11-03-2013 at 10:17 PM (Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background)






    So, took the car to the alignment place.

    I always use JPS Motorsport because I know their platform is
    re-calibrated every 6 – 12 months.

    Asked the tyre pressure to be left as it was and
    checked the SAI figure.

    The existing setup was completely wrong.
    The only good figure was actually the
    ...
Page 3 of 5 FirstFirst 12345 LastLast