View RSS Feed

Electronics

  1. Kaz-kzukNA1's Avatar

    Cigarette Lighter Socket 02

    by
    Kaz-kzukNA1
    , 18-02-2023 at 01:17 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)










     ...
    Categories
    Electronics
    Comments 0 Comments
    Read MoreRead More
  2. Kaz-kzukNA1's Avatar

    Cigarette Lighter Socket 01

    by
    Kaz-kzukNA1
    , 18-02-2023 at 01:06 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)









     ...
    Categories
    Electronics
    Comments 0 Comments
    Read MoreRead More
  3. Kaz-kzukNA1's Avatar

    Brake Light Switch 02

    by
    Kaz-kzukNA1
    , 28-01-2023 at 12:12 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)






    My NSX is JDM so it has 4 x brake lights.
    Each are rated at 27W so over 100W and about 8A passing through this small terminal when the brake pedal operated when the alternator is regulating the voltage around 14.0 – 14.5V.

    I switched to P21/5 in the past as it was not easy to find Bay15d 27/5 in UK so lower current consumption but still, fair amount of heat could be generated at the switch.


    With the     ...

    Updated 28-01-2023 at 12:53 PM by Kaz-kzukNA1 (font)

    Categories
    Brake , Electronics
    Comments 0 Comments
    Read MoreRead More
  4. Kaz-kzukNA1's Avatar

    Brake Light Switch 01

    by
    Kaz-kzukNA1
    , 28-01-2023 at 11:52 AM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)






    After 3 years, finally, I’m going back to the normality but very slowly.
    Losing internet access at the end of last year and into the new year for about 7 days was inconvenient but at the same time, very refreshing.

    Injured left foot and still limping but just need to live with it.

    Will be joining the indoor setting from now on but I’m afraid not inviting people inside the house or inside the garage so no coffee     ...
    Categories
    Brake , Electronics
    Comments 1 Comment
    Read MoreRead More
  5. Kaz-kzukNA1's Avatar

    Gauge Cluster service 04

    by
    Kaz-kzukNA1
    , 17-01-2022 at 07:54 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)











    New EPT sealer installed.


    So far, everything is very delicate task because you don't want touching any part of the dial face even while wearing the glove.     ...
    Categories
    Electronics
    Comments 1 Comment
    Read MoreRead More
Page 3 of 46 FirstFirst 1234513 ... LastLast