Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer

The right side tail light alignment was not great against the bumper and
the centre & left tail light assy. ...

Tags: aspirator fan, cabin temperature sensor, eps rack, tail light, tail light assy, taillight assy

Categories

TB/WP/Valve Service , Health Check Service

The noisy cabin temperature sensor.
It was full of dust as reported earlier.
Disassembled, adjusted and now it’s clean.




...

Updated 30-11-2013 at 01:05 PM by Kaz-kzukNA1

Tags: aspirator fan, cabin temperature sensor, cooling fan control unit, fan control unit, fcu

Categories

A/C CCU Board Service , Heater, A/C , Electronics

Already in the process of removing the brake caliper and coolant hoses so
doing bit of catch up updating the blog.





For some reason, someone trimmed part of the door handle at both R & L sides.

...

Tags: bleeder plug, cabin temperature sensor, cooling sys, door handle, health check, th body, vtec spool valve

Categories

Health Check Service

Temporarily installed my re-soldered one for a test and confirmed the FCU failure.
The faint noise you can hear in the background after replacing the FCU is the
aspirator fan at the cabin temperature sensor.


As seen on many NSX, it was full of dust making this noise.


...

Updated 11-11-2013 at 02:33 PM by Kaz-kzukNA1

Tags: aspirator fan, cabin temperature sensor, eng gnd cable, fan control unit, fcu

Categories

Health Check Service

So, took the car to the alignment place.

I always use JPS Motorsport because I know their platform is
re-calibrated every 6 – 12 months.

Asked the tyre pressure to be left as it was and
checked the SAI figure.

The existing setup was completely wrong.
The only good figure was actually the ...

Tags: alignment, aspirator fan, cabin temperature sensor, caster, main relay

Categories

Alignment , Heater, A/C , Electronics