Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer

Doing bit of catch up updating the blog as
I have been not well recently but couldn’t
take break due to other projects.

So, the engine is out.








...

Updated 10-04-2013 at 10:26 AM by Kaz-kzukNA1

Tags: eng refresh, exh manifold, header, manifold, o2 sensor

Categories

TB/WP/Valve Service

Addition to the parts came with the header,
we also prepared the following.

The owner kindly made some bracket for holding the
rear O2 sensor cable in case I need to use it depending on
the routing of the cable.


Also, addition to the C32B OEM gasket at the exhaust port,
I always recommend using ...

Tags: eng refresh, header

Categories

TB/WP/Valve Service

While removing the parts for engine removal,
decided to pre-fit the aftermarket header that ...

Updated 06-04-2013 at 12:32 PM by Kaz-kzukNA1

Tags: eng refresh, header

Categories

TB/WP/Valve Service

At #1 and #3 INJ base, noticed some sort of marking.
#2 was dry. It's the 2nd photo ...

Tags: a/c, a/c compressor, cat, compression check, compressor, eng refresh, exhaust, heat shield, inj, injector

Categories

TB/WP/Valve Service

Started to work on another NSX.


The service menu is to carry out the Eng Refresh to
replace the TB/WP/etc and also install aftermarket
header at the same time.








The owner had to drive through the salty gritting road
due to recent heavy snow and by the time he arrived ...

Updated 03-04-2013 at 02:09 PM by Kaz-kzukNA1

Tags: eng refresh, ig coil, oil seepage, spark plug

Categories

TB/WP/Valve Service