View RSS Feed

Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer

Updates from Kaz-kzukNA1

  1. A/C CCU Board Service 01

    by , 02-12-2012 at 03:19 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)



    I have been focusing on writing lots and lots of documents and
    in the back ground,
    I started working on another CCU board.
    The owner contacted me as he lost several controls through his CCU.

    He had a quick look at the board and confirmed that there was just
    a small leakage at C44 and told me that the rest of the board looked fine.



    Well, I heard the same story more than 100 times so
    when I received
    ...
  2. A/C CCU Board Service B-02

    by , 26-11-2012 at 10:37 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)


    I have now covered more than 100miles using my NSX with
    the board that I serviced in 2009.
    It’s been tested for many days now with no issues and
    it passed the testing scenarios many times so I came to
    a conclusion that there is nothing wrong with it.

    The fan always stops whenever the ‘OFF’ button is pressed so
    the reported issue is outside of CCU.





    The other board that was repaired by someone
    ...
  3. A/C CCU Board Service A-02

    by , 25-11-2012 at 10:55 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)



    Apart from three capacitors,
    rest of them had some sort of acid leakage and compared to other board,
    the acid managed to penetrate through so deep into the board that
    the repair task was quite difficult.

    At some part of the board, the copper pad was completely dissolved and
    missing so there was no way I could apply the soldering.






    ...
  4. A/C CCU Board Service A-01

    by , 23-11-2012 at 10:31 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)






    Another owner contacted me for his
    Climate Control Unit (CCU) issue.
    Recently, while he was driving, all of a sudden
    he lost everything on the CCU display and immediately the
    windshield misted up.















    ...
  5. A/C CCU Board Service Final Check for A-05 & B-03

    by , 03-11-2012 at 10:30 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)





    Happy with the bench testing and after applying the conformal coating on
    board A and B, it’s time to use my NSX to test both boards.










    Using the same scenario ...
Page 21 of 35 FirstFirst ... 11192021222331 ... LastLast