Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer

Started servicing another NSX from last week.
The service menu is to refresh the Brake and Cooling system, Health Check, JDM Cruise Control limiter cut, Audio system refresh, etc.





This is another NSX that I never serviced before so started with the Health Check first.






...

Updated 23-09-2016 at 10:19 AM by Kaz-kzukNA1 (typo)

Tags: wheel nut

Categories

Health Check Service

Wheels back on the car, move the car back and forth, bounce it several times and clearance check under 1G first.
The rideheight will drop further as I used new OEM bush/mount but at the rear wheel, the clearance ...

Updated 27-04-2015 at 12:10 PM by Kaz-kzukNA1 (typo... and possibly still there....)

Tags: nsx badge, washer nozzle, wheel nut

Categories

Eng Refresh Stage 1 + LMA , Suspension , Body

The engine is already out of the eng bay so doing bit of
catch up updating the blog again.....




Forgot to mention this in the Prep post.....

As seen on many NSX with aftermarket wheel or spacer,
I’m not sure about the suitability of this wheel nut for the
OEM wheel.
Because it was installed/removed ...

Tags: crank pulley, oil pan, wheel nut

Categories

TB/WP/Valve Service

When this NSX arrived at my place, I struggled to start the engine
when the engine/cabin were still hot so replaced the main relay with
a new one.



As reported earlier, there seemed to be a problem with the Fan ...

Updated 07-11-2013 at 10:16 AM by Kaz-kzukNA1

Tags: fan control unit, main relay, th cable, wheel nut

Categories

Eng Refresh Stage 1 + LMA

Lots of parts including the replacement oil cooler related items
just arrived.

Also, there were parts for the owners who placed the order the other day.






Lots of Main Relay..... The Non-DBW type and the DBW one.



...

Updated 18-10-2013 at 01:32 PM by Kaz-kzukNA1

Tags: main relay, wheel nut, wheel speed sensor

Categories

Parts