View RSS Feed

Steering

  1. Health Check, Cooling Sys, etc 04

    by , 28-09-2014 at 12:35 PM (Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background)








    By the way, the battery cable cramp was in very poor condition on both the negative and positive sides.


    I will try to polish the internal wall later. The GND cable was sharply bent and already very loose with someone ...
    Categories
    Steering , Electronics
  2. Health Check, Cooling Sys, etc 03

    by , 28-09-2014 at 12:17 PM (Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background)











    Since the spline of the drive shaft outboard joint doesn't want to come out from the hub, I'm turning the wheel 90deg every few hours and keep applying the ATF/Accetone in a hope to one day, it will pop out using the hydraulic puller.
    So far, I managed to push it out using this method even for the toughest one without using any sorts of air hammering tool and I do
    ...
  3. Slowly... 02

    by , 20-07-2011 at 12:42 PM (Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background)








    Click image for larger version. 

Name:	FrontAlignmentBolt.JPG 
Views:	2441 
Size:	153.8 KB 
ID:	9906
    Click image for larger version. 

Name:	FrontAlignmentBoltSiliconeGrease.JPG 
Views:	2459 
Size:	145.1 KB 
ID:	9908

    Took out the Front camber adjuster bolts to apply silicone grease before visiting the alignment platform.




    Click image for larger version. 

Name:	SeizedFLcaster.JPG 
Views:	2545 
Size:	150.2 KB 
ID:	9909

    Unfortunately, both R & L Caster adjuster were seized so we’ll see how it goes during the alignment session.





    Click image for larger version. 

Name:	RackEndCheck.JPG 
Views:	2413 
Size:	124.5 KB 
ID:	9907

    During the ...
    Tags: camber, caster Add / Edit Tags
    Categories
    Steering , Suspension , Alignment , Body
Page 2 of 2 FirstFirst 12