Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer

Nothing special and just usual vacuum leak check of the cooling system followed by the vacuum feed of Honda Type 2 coolant.

As we are not going to replace the coolant hoses this time, some old Type 2 coolant was left in the system. Therefore, I recommend the owner to replace the coolant again in 2 years time to be on the safe side. Normally, you can go for 4 ...

Tags: honda type 2 coolant, oil filter, pressure bleed, pressure bleeding, type 2 coolant, vaccum leak check, vacuum feed, vacuum fill

Categories

Health Check Service , Engine/Tyre , Cooling , Brake

Already at the end of brake OH service so doing another catch up
in updating the blog.....



After another vacuum leak check, filled the system with
Honda Type 2 blue coolant.



After initial bleeding, ...

Updated 28-11-2013 at 12:40 PM by Kaz-kzukNA1

Tags: battery, bleeding, honda type 2 coolant, idle adjust screw, th cable, type 2 coolant, vacuum feed, vacuum fill, vacuum leak check

Categories

Cooling

New GND cable installed.



As mentioned many times, please do not over tighten the terminal cramp.
You should see several mm gap when the cramp is secured to the battery post.
People tends to just tighten it until ...

Tags: battery cable, battery post, coolant hose, gnd cable, pressure bleed, vaccum leak check, vacuum feed

Categories

Eng Refresh Stage 1 + LMA