View RSS Feed

Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer

Updates from Kaz-kzukNA1

  1. Eng Refresh, Health Check, etc 37

    by , 20-02-2015 at 10:16 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)






    Didn't like the level of corrosion at the brake banjo bolt so replaced both RR & RL ones.
    Bleeder screws were fine at all four corners so just re-used them.

    As we are not replacing the Brake master cyl, ...

    Updated 21-02-2015 at 08:23 PM by Kaz-kzukNA1

    Categories
    TB/WP/Valve Service
  2. Annual Service, Health Check, Brake OH 03

    by , 07-08-2014 at 01:25 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)






    I think I'll replace the air cleaner element. Can't see through enough lights.





    I washed the TH butterfly long time ago and quite surprised to see it's still ...
  3. Annual Service, Health Check, iPod adaptor, etc 02

    by , 26-07-2014 at 01:59 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)
    Some of the points from the Health Check.....


    ABS Error code #15 stored in the memory. It's for the open/short circuit of RR wheel speed sensor.
    As there was no warning light during the test driving session and also when the owner arrived at my place after hours of driving, cleared it for the time being.
    For your reference, with the latest ABS brain, you can't clear the error code by disconnecting the battery, pulling the fuse out or disconnecting the connector. ...
  4. Health Check, Brake pad, etc 05

    by , 09-06-2014 at 09:46 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)






    Nothing special here so just a quick report....





    Eng oil and filter changed regardless of super low annual mileage.
    As mentioned many times, when the eng is stopped, some of the valves ...
  5. Eng Refresh 24

    by , 15-03-2014 at 01:45 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)

    Time for the compression check after the Eng Refresh.
    Full data has been sent to the owner.

    [psi]
    #1: **1 #2: **6 #3: **9
    #4: **5 #5: **7 #6: **0

    Really happy with the result and paid off for spending hours
    adjusting the valve clearance as well as carefully installing
    each parts and tensioning the TB.
    ...
Page 2 of 6 FirstFirst 1234 ... LastLast