Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer

This is just an information purpose post on how to press out the seized drive shaft spindle/spline.
I normally use hydraulic hub puller but if it doesn't work, followings are the recommended method.

I tried to find the photo from my archive but couldn't find good ones so followings were gathered from Japanese website a while ago.
I tried to remember from where I got these as I should put referrence to them for copyright reason but unfortunately, I couldn't extract ...

Updated 20-10-2014 at 08:10 AM by Kaz-kzukNA1 (extra info regarding hub carrier)

Tags: bearing separator, drive shaft

Categories

Personal View/Self Talk

For now, I'm going to return this NSX temporarily to the owner so that he can take it to other place with commercial vehicle class tool that should be able to press out the seized drive shaft spindle.
I was trying to find some photos from my archive but couldn't find suitable one so will forward the ones that I found on the web to the owner on recommended method.

Disappointed but at the same time, ...

Tags: 32109-sl0-000, eacv, idle adjust, idle adjust screw

Categories

Fuel and Emissions , Electronics , Personal View/Self Talk , Parts

The owner bought new horn button and ...

Tags: horn, horn button, horn switch, steering wheel

Categories

Body , Electronics

Over the last several days, I was tackling with the drive shafts on both R & L sides.


As reported earlier, they were seized in the hub.


First attempt using the hydraulic hub puller didn't work so I then drove the car for a while to put some heat and vibration ...

Tags: bearing separator, drive shaft, hub puller, hydraulic hub puller

Categories

Driveshaft , Brake

...

Updated 10-10-2014 at 02:24 PM by Kaz-kzukNA1 (parts no. added)

Tags: 32106-sl0-000, 3rd brake light

Categories

Body , Electronics