View RSS Feed

Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer

Updates from Kaz-kzukNA1

  1. Health Check, Annual Service 04

    by , 17-08-2013 at 10:17 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)





    In the process of replacing the CL Hyd system.
    Just black fluid in the reservoir.
    It's the debris from the aluminium cyl wall and deteriorated rubber cup....

    Looks like someone just kept topping up the fluid when the level dropped.
    Fluid doesn’t just disappear so should have checked where it has leaked.

    ...
  2. Health Check

    by , 12-02-2013 at 10:15 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)



    Went out for the test driving session before
    starting the mechanical service.

    In the past, the ABS on this NSX didn’t work and
    it just locked up the wheels.
    Three out of the four solenoids were stuck closed.
    I flushed the system a while ago and after that, one of the solenoid
    started to show the leaky solenoid issue.
    Since then, the owner kept exercising the system.

    The ABS operated fine this time although the
    ...
  3. Annual Service + Audio Head Unit 05

    by , 21-09-2012 at 10:07 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)




    Continuing with the Health Check and ABS…….





    All four solenoids operated fine so no drama here.









    This is the 2nd generation ABS so the ...
  4. Tail Light Assy

    by , 09-08-2012 at 10:24 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)





    When I first looked at this NSX, the upper part of the centre piece tail light assy was
    rattling and felt as if there was no fixing.

    Also, there was some moisture trapped inside the assy.


    I saw so many NSX with broken stud bolt due to too much torque applied when
    aligning these light parts so I knew it
    ...
    Tags: tail light Add / Edit Tags
    Categories
    Body
Page 2 of 2 FirstFirst 12