Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer

As expected, DM10 and 11 had to be removed in order to check the
nearby tracks and clean the area.

These old components have to be carefully removed without breaking them
as they are no longer manufactured.
They are not RoHs compliant.



...

Tags: a/c, a/c ccu, a/c climate control unit, ccu, ccu board, climate control unit

Categories

A/C CCU Board Service

While carrying out the Eng Refresh, another owner sent in his A/C CCU board
for preventative maintenance.

He wanted to clean his cabin temperature sensor due to lots of dust
trapped at the aspirator fan (and possibly making annoying noise) and
although he was not experiencing noticeable issues with his A/C system,
he thought it would be a good idea to have the CCU serviced while
the centre console was off.

...

Tags: a/c, a/c ccu, a/c climate control unit, ccu, ccu board, climate control unit

Categories

A/C CCU Board Service

Went out for the final test driving session.

Activated the ABS in order to adjust the fluid level.
Again, noticed that the ABS pump would kick in just after
once or twice the ABS was activated.

The accumulator is indeed loosing its high pressure capacity.


Driving the car without the A/C in this warm condition is not nice.....


Once again, really nice feedback from the new coilover kit.
I wish I can ...

Tags: a/c, abs, coilover, test driving

Categories

Health Check Service

At #1 and #3 INJ base, noticed some sort of marking.
#2 was dry. It's the 2nd photo ...

Tags: a/c, a/c compressor, cat, compression check, compressor, eng refresh, exhaust, heat shield, inj, injector

Categories

TB/WP/Valve Service

Can’t move the car without brake and since re-booked the
alignment service for next week, decided to change the
order of remaining services.







The A/C evaporator was fairly clean with just surface dust but
when applied compressed air to the bottom of the case,
all sorts of things came out. ...

Tags: a/c, air con, evapo, evaporator

Categories

Heater, A/C