Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer

Tow hook cover was missing from the front bumper so new colour coded one
ordered and installed.
Hope it will stay there for longer this time.
Most of the time, it will come off if the bumper was re-sprayed or with the age
and heat, the rate of warping between the bumper and the hook cover is different
resulting in cover ...

Tags: block test, compression check, eacv, eng bay cooling fan, eng block test, engine block test, idle adjust screw, spark plug, tow hook cover

Categories

Eng Refresh Stage 1 + LMA , Fuel and Emissions , Body

Intake manifold back in place together with Eng Loom.
Some of the bolts were the wrong spec so looks like someone worked on the
engine in a hurry.





...

Tags: eacv, fast idle valve, heat shield, intake manifold

Categories

Eng Refresh Stage 1 + LMA

Carried out the test driving session.

It was fairly cool so not too bad when driving with CCU setup at 32degC.
Will adjust the coolant level tomorrow morning.


Exercised the ABS several times until the ABS pump was activated
in order to pressurise the accumulator to the spec and
to adjust the fluid level afterwards.


Brake back to how it should be.


Although it is ...

Updated 24-09-2012 at 10:09 AM by Kaz-kzukNA1 (Revised blog category.)

Tags: abs, eacv, idle control, idle rpm

Categories

Eng Refresh Stage 1 + LMA , Fuel and Emissions , ABS Original , Personal View/Self Talk