Clutch Master/Slave Cyl

Unlike the Brake master cyl, CL one is not that difficult to bleed the air if you know
the internal valve structure.


Just prime the master cyl with the pedal down first and then lift the pedal and start pressure bleeding.

...

Tags: clutch master cyl, clutch slave cyl, pressure bleed

Categories

Clutch Master/Slave Cyl

All the extra parts from Japan arrived so from today, I can speed up the process.

Removed the CL master cyl and even I knew it was already leaking,
quite surprised to see the amount of fluid held inside the rubber cap
at such low mileage.

Not easy to see in this photo but it was ...

Tags: cl master, cl slave, clutch hose, clutch master cyl, clutch slave cyl

Categories

Clutch Master/Slave Cyl

Before installing the Slave Cyl onto the GBox, I normally bleed the system first while keeping the bleeder screw upwards.
Obviously, you need to hold the slave piston in place with something before applying any pressure.

About to start the pressure bleed.

Unlike the Brake Hyd system, ...

Tags: clutch master, clutch slave

Categories

Clutch Master/Slave Cyl

Seems like the site is back online again so I’ll back date the posts.

So, started to remove the existing CL Hyd parts and as suspected, the Slave Cyl was leaking.

New Master Cyl.
After pouring small amount of brake fluid just to prime it, installed it.


...

Tags: clutch master, clutch slave

Categories

Clutch Master/Slave Cyl

The owner commented that from time to time, he was having difficulty on selecting gears on downshift only.
He didn’t feel any issues for selecting 1st or Reverse gear from standstill and no issues with upshift.

I suggested the owner that it is very unlikely to be Clutch (CL) Hydraulic (Hyd) System related but the owner wanted to replace it any way as there was a sign of leakage at the Slave Cyl and start from there.

I test ...

Tags: clutch master, clutch slave

Categories

Clutch Master/Slave Cyl