Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer

...

Tags: air cleaner element, compression check, iat sensor, intake chamber, main relay

Categories

Health Check Service

...

Updated 24-11-2013 at 02:05 PM by Kaz-kzukNA1

Tags: a/c belt, a/c belt tension, intake chamber, th body, vacuum fill, vacuum leak check

Categories

Cooling , Fuel and Emissions

This side of the engine is nearly done.



Time to finish the intake manifold.





The 90deg swaging of the VVIS plate screw against the shaft.



...

Updated 17-09-2013 at 11:51 AM by Kaz-kzukNA1

Tags: coolant hose, egr, intake chamber, intake manifold, thermostat, vvis, vvis plate

Categories

Eng Refresh Stage 1 + LMA

Time to inspect the VVIS plates.



This engine uses the OEM parts (side intake chamber, air box, air filter, TH body)
for the intake air system so the amount of debris inside the
intake manifold was minimum.

Some of the black bits are the edge coating around the VVIS plate.



Every ...

Updated 15-09-2013 at 02:53 PM by Kaz-kzukNA1

Tags: intake chamber, intake manifold, vvis, vvis plate

Categories

Eng Refresh Stage 1 + LMA , Engine/Tyre