View RSS Feed

Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer

Updates from Kaz-kzukNA1

  1. Final Touch

    by , 09-06-2014 at 09:48 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)

    Quite often, being neglected but I don't like the loose cable sitting behind the rad fan.
    OEM clips installed and looks much better and safer when you open the bonnet.




    ...
  2. Health Check, Brake pad, etc 06

    by , 09-06-2014 at 09:47 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)









    After considering the brake balance, risk of re-using the existing brake disc and 100% on the street driving conditions, decided to go for the EBC Redstuff for the rear pad.
    I use the ...

    Updated 10-06-2014 at 10:23 PM by Kaz-kzukNA1

    Categories
    Health Check Service , Brake , Body
  3. Health Check, Brake pad, etc 05

    by , 09-06-2014 at 09:46 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)






    Nothing special here so just a quick report....





    Eng oil and filter changed regardless of super low annual mileage.
    As mentioned many times, when the eng is stopped, some of the valves ...
  4. Health Check, Brake pad, etc 04

    by , 09-06-2014 at 09:45 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)





    Always apply high temp Urea grease at the Release fork saddle.
    Otherwise, you will feel heavy friction with squeaking noise when CL pedal is operated.

    Not required for DIY service but if you want to save the time and fluid,
    ...

    Updated 10-06-2014 at 08:59 PM by Kaz-kzukNA1 (Layout)

    Categories
    Health Check Service , Engine/Tyre , Clutch Master/Slave Cyl
  5. Health Check, Brake pad, etc 03

    by , 09-06-2014 at 09:42 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)



    The owner has already collected his NSX from my place so doing some catch up
    updating the blog again....
    Still changing all sorts of software for the new PC build but getting there....








    Fuel Lid alignment

    On arrival, it didn't look nice.



    ...