View RSS Feed

Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background

Testing description section.

  1. Cooling Sys, etc 02

    by , 20-04-2021 at 09:01 PM (Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background)
  2. Eng Refresh, Health Check, etc 28

    by , 13-03-2020 at 10:31 PM (Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background)
  3. Health Check, Brake OH, Koyo Rad, etc 11

    by , 28-10-2015 at 06:10 PM (Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background)



    The CL release fork pocket was completely dry and causing metallic squeaking noise when the CL pedal was operated.

    High temp Urea grease applied before installing the CL slave cyl.

    Another reason why I always recommend
    ...
  4. Health Check, Brake OH, Koyo Rad, etc 09

    by , 24-10-2015 at 11:13 AM (Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background)
    Back to the other NSX on the lift at my place……




    I already knew the CL master cyl was leaking so decided to replace the CL master/slave/hose as a set.

    The owner had majority of the parts except for the master cyl, the fixing bolts, etc but then I found the NA1 Type-R CL pedal together with the damper-less joint.
    There was also
    ...