View RSS Feed

Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background

Testing description section.

  1. Cooling Sys, Brake OH, etc 09

    by , 08-02-2019 at 03:40 PM (Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background)
  2. Eng Refresh, Health Check, etc 03

    by , 19-11-2014 at 04:36 PM (Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background)






    CL master cyl is leaking and the CL hose looked to be seeping the fluid as well.
    To be replaced while the engine is out.


    I was told that the CL slave cyl was replaced in the past so I'll re-use it.





    ...
  3. Final Touch

    by , 10-11-2014 at 10:30 PM (Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background)

    Managed to drill out one of the bolt holding the brake line bracket at the original position.
    Looking at the surface of the other bolt, I didn't have enough confidence in driving the drill square through the remaining bolt body so decided to leave it as it is. Not a problem as at the other side of the hub carrier, I re-installed the rubber protector around the brake line ...
  4. Health Check, Cooling Sys, etc 15

    by , 10-10-2014 at 02:11 PM (Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background)






    ...

    Updated 10-10-2014 at 02:24 PM by Kaz-kzukNA1 (parts no. added)

    Categories
    Body , Electronics