Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer

...

Tags: blowby, coolant hose, coolant pipe, spool valve, tb tension, valve cover

Categories

Eng Refresh Stage 1 + LMA

In the process of servicing the VTEC Spool valve.

As reported earlier, rear one ...

Tags: oil cooler, oil press sender, oil press sender unit, oil pressure sender unit, spool valve, vtec spool valve

Categories

TB/WP/Valve Service

In the process of clearance adjustment.






24 adjustments were checked twice for the clearance and the torque. ...

Tags: oil press sender, spool valve, valve clearance, vtec spool valve

Categories

Eng Refresh Stage 1 + LMA

Despite the poor status of cooling system,
the mechanical engine parts were in very clean condition.

All LMA felt soft but they will be replaced any way.

Slight heavy marking on #3 intake side cam lobe but nothing major.
Looked to be something (black liquid gasket??) was trapped
in the past ...

Tags: cam shaft, camshaft, lma, oil press sender, spool valve, vtec, vtec spool valve

Categories

Eng Refresh Stage 1 + LMA

VTEC Spool valve service.

It can be done at any time without opening the engine
but it’s a MUST item due to the process for
replacing the LMA.

This NSX is using the smaller ...

Updated 15-05-2013 at 10:52 AM by Kaz-kzukNA1

Tags: crank pulley, head cover, oil press sender, oil pressure sender, spool valve, valve cover, vtec, vtec spool valve

Categories

Eng Refresh Stage 1 + LMA