Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer

...

Updated 22-11-2017 at 12:55 PM by Kaz-kzukNA1 (back dated to reflect the actual date.)

Tags: brake bleeding, brake fluid, idle air adjust screw, idle control, obd2, pressure bleeding, test driving

Categories

Fuel and Emissions , Brake , Personal View/Self Talk

Didn't like the level of corrosion at the brake banjo bolt so replaced both RR & RL ones.
Bleeder screws were fine at all four corners so just re-used them.

As we are not replacing the Brake master cyl, ...

Updated 21-02-2015 at 08:23 PM by Kaz-kzukNA1

Tags: air filter, idle adjust, idle control, pressure bleed

Categories

TB/WP/Valve Service

Carried out the test driving session.

It was fairly cool so not too bad when driving with CCU setup at 32degC.
Will adjust the coolant level tomorrow morning.


Exercised the ABS several times until the ABS pump was activated
in order to pressurise the accumulator to the spec and
to adjust the fluid level afterwards.


Brake back to how it should be.


Although it is ...

Updated 24-09-2012 at 10:09 AM by Kaz-kzukNA1 (Revised blog category.)

Tags: abs, eacv, idle control, idle rpm

Categories

Eng Refresh Stage 1 + LMA , Fuel and Emissions , ABS Original , Personal View/Self Talk