View RSS Feed

Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer

Updates from Kaz-kzukNA1

  1. Eng oil, Filter and Boot lid hinge protector

    by , 17-03-2013 at 10:37 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)



    Not much to report.




    Just a quick eng oil and filter change.

    Draining the old oil from the bottom and then pump out
    further 300 - 400cc or so from the top.









    ...

    Updated 18-03-2013 at 02:45 PM by Kaz-kzukNA1

    Categories
    Engine/Tyre , Body
  2. Eng Refresh Stage 2 – 14

    by , 03-01-2013 at 10:27 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)



    In Japan, we cerebrate almost any occasions on the calendar but
    New Year’s day is one of the most important one for us.
    We celebrate Christmas as well but it’s normal working day for
    most of the companies.

    As I’m bit behind the schedule, just a quick break and back to work.






    Managed to
    ...
  3. SGS Engineering, Re-gas Damper Strut

    by , 08-08-2012 at 10:42 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)




    As you may have already experienced, sooner or later,
    your gas damper/strut at the boot lid or the rear glass hatch will
    get weaker and no longer be able to hold the object in the air.


    This NSX has an aftermarket rear wing that is quite heavy
    compared to the OEM one.
    Because of this, the OEM gas damper has
    ...

    Updated 11-03-2017 at 02:17 PM by Kaz-kzukNA1 (correction on the force unit)

    Categories
    Body
  4. Boot Lid Hinge Rubber protector

    by , 28-06-2011 at 11:43 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)



    Another one of the most common parts missing from your early model NSX.



    Click image for larger version. 

Name:	BootLidHingeRubber01.JPG 
Views:	1188 
Size:	176.7 KB 
ID:	9728

    It’s the rubber protector located at the boot lid hinge.


    Without this, the forward section of your boot lid alignment would be lower than the side wing.


    On the later model, the design of the ‘hook’ was changed so that the rubber protector won’t be easily dislocated but on the earlier models, ...
    Categories
    Body
  5. Gas Damper, Air scoop

    by , 06-06-2011 at 11:17 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)




    As I don’t like working on the engine while the damper is too weak to hold the hatch glass opened, decided to start replacing the dampers first.



    Click image for larger version. 

Name:	EngHatchDamper.JPG 
Views:	1479 
Size:	236.6 KB 
ID:	9529

    You could recharge the gas if you want to but getting the new one from Japan is also a good option.


    It comes with the stud bolt as well.


    Now I don’t need to hold the Eng Hatch glass with my special padded bloom ...
    Tags: boot lid, damper Add / Edit Tags
    Categories
    Body