Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer

In order to be as close as possible with the OEM rideheight, I'll set the C-ring at the upper perch.

Using the lower perch will lower the rideheight about 25mm depending on the lever ratio.


Because of using the new rubber parts, we can't carry out the alignment service immediately until the damper/spring ...

Tags: alignment, bilstein, rideheight

Categories

Suspension

Not much to report while the car is going up and down on
the lift to have its ride height adjusted and then moving
back and forth the short distance with hard braking to
rock the chassis.

I haven’t carried out the test driving session yet but
already feeling the huge difference by braking hard and also
even when the car is lowered to the ground from the lift.





...

Tags: bc racing, coil over, coilover, ride height, rideheight

Categories

Suspension