Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer

Bilstein damer kit with old/new OEM parts.
The existing OEM ones were tired and not getting back to free length state quickly enough. Good idea to replace it now.
The gas/oil chamber is probably blown.



...

Tags: bilstein

Categories

Eng Refresh Stage 1 + LMA , Suspension

Ready to take the INJ to my local place where the race teams and many garages are using for the INJ cleaning.

Part of the ASNU service network and pretty much using the similar cleaning equipment everywhere.
Should be back today or tomorrow as they had to order replacement INJ filter ...

Tags: brake calliper, brake disc, brake pad, cl release fork, cl slave cyl, inj, injector, urea grease

Categories

Eng Refresh Stage 1 + LMA , Brake

The existing thermostat lost 2/3 of its rubber seal allowing the coolant to pass through during the warm up.
No wonder why it took ages to warm up in March.



...

Tags: coolant pipe, eng detailing, eng dressing, inj, injector, thermostat

Categories

Eng Refresh Stage 1 + LMA

VTEC spool valve serviced, new P08 spec gasket/filter installed together with the new bolts. Very important especially the short bolts as they are exposed to heat and moisture resulting in breakage over long ...

Tags: intake manifold, th body, vtec spool valve

Categories

Eng Refresh Stage 1 + LMA

The owner is already aware of this but there was air or debris trapped at the centre upper section of the front valve cover. Also, at the front valve cover, there was straight line showing ...

Tags: eng detailing, eng dressing, liquid gasket, valve cover, valve cover coating

Categories

Eng Refresh Stage 1 + LMA