Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer

The owner wanted me to take a look at the cabin noise.
One of the cause was the rattling boxes and wires behind the
centre console around the heater unit.

Normally, I’m quite happy to disconnect any connectors and
re-rote the cables but as these could be for the security devices,
it is too risky for me to just start disconnecting any of the connectors
without knowing the system architecture or wiring diagram.

...

Tags: cabin noise, ceiling panel, ceiling trim, eng detailing, eng dressing, rear upper trim

Categories

Body

Although the owner was not feeling any issues on his A/C system,
he decided to carry out the preventative measures on the CCU.
Very good decision by acting now instead of waiting for something to fail
as it will save the time and cost for the owner.




The light green circuit board material with brown capacitor ...

Tags: ccu, climate control unit

Categories

A/C CCU Board Service

Went out for the 1st test driving session for the general checks.

Happy with the result so back on the lift, visual inspection,
re-torque the wheel nut, adjust the Aux belts tension, etc and
checked the base idle rpm.




This is the DBW model so needs to short the 2pin Blue SCS terminal
before ...

Tags: door mirror, idle adjust screw, test driving

Categories

TB/WP/Valve Service , Body