View RSS Feed

Cooling

  1. Cooling System Bleeding Procedure 03

    by , 26-12-2022 at 10:54 PM (Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background)









    Now ready to take the car out for the 1st test driving session.

    For the test driving session, even in the hot summer,
    I’m afraid you want to keep the A/C CCU temperature setting at higher temperature range to keep the water valve open.


    I always set the CCU temperature dial at max but keep the fan speed to min for at least 5min during
    the test driving session even during
    ...

    Updated 27-12-2022 at 11:40 AM by Kaz-kzukNA1 (format)

    Categories
    Cooling
  2. Cooling System Bleeding Procedure 02

    by , 26-12-2022 at 01:49 PM (Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background)







    ...

    Updated 27-12-2022 at 11:38 AM by Kaz-kzukNA1 (photo link try #2, format)

    Categories
    Cooling
  3. Cooling System Bleeding Procedure 01

    by , 26-12-2022 at 01:47 PM (Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background)




    Shared the following for another owner on NSX Prime so going to cut and paste here for future search.



    I wrote this for other owners when asked about how I bleed the cooling system years ago and
    it’s cut and paste of multiple messages from the past.

    Very old info but should be still useful.


    First, the basic.


    The method in Workshop manual is OK but mainly written based on the
    ...

    Updated 27-12-2022 at 11:30 AM by Kaz-kzukNA1 (photo link try #2)

    Categories
    Cooling
  4. Cooling Sys, etc 20

    by , 20-04-2021 at 09:19 PM (Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background)













    ...

    Updated 21-05-2021 at 03:21 PM by Kaz-kzukNA1

    Categories
    Engine/Tyre , Cooling
  5. Cooling Sys, etc 18

    by , 20-04-2021 at 09:17 PM (Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background)













    ...

    Updated 21-05-2021 at 03:19 PM by Kaz-kzukNA1

    Categories
    Engine/Tyre , Cooling
Page 1 of 45 12311 ... LastLast