View RSS Feed

EPS - Power Steering

  1. Cooling Sys, ABS Upgrade, etc 03

    by , 11-06-2018 at 01:37 PM (Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background)
  2. Final Touch 01

    by , 28-02-2017 at 10:36 PM (Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background)










    Had to focus on finishing the service over the last few days so being away from the Forum and
    already the owner collected his NSX from my place so doing bit of catch up updating the blog.





    ...
  3. Eng Refresh + LMA, Brake OH, etc 28

    by , 28-01-2017 at 12:08 PM (Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background)










    It was very cold recently that I was not happy with the metal temperature despite the usage of the oil heater that
    decided not to carry out the valve clearance adjustment until this weekend.

    In the meantime, decided to finish other items.






    ...
  4. EPS Controller Service 02

    by , 02-09-2014 at 10:53 AM (Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background)

    Following from the previous blog EPS Controller Service 01, started drilling the holes into the circuit board.
    Very delicate process and takes long time......








    ...
  5. EPS Controller Service 01

    by , 27-08-2014 at 01:49 PM (Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background)







    Wanted to make some changes in the rhythm so decided to work on the EPS controller that another owner sent in recently.

    Following on from my research on the EPS controller
    ...
Page 1 of 3 123 LastLast